HireLV Handbook › Defaults › DSC › PowerSeries Neo HS2016/2032/2064/2128

Verified 2026-10-17

PowerSeries Neo HS2016/2032/2064/2128 default installer code and reset

Suggest a correction

Suggest a correction

A free account is required. Reports stay private until a correction is published.

Default codes are for authorized installers. Change defaults at commissioning. No bypass or unauthorized-access instructions.

DSC PowerSeries Neo HS2016/2032/2064/2128. Last verified 2026-10-17 against PowerSeries Neo reference manual.

Defaults Flag

installer5555
master1234 (code [01])
Default IPn/a

Reset

[*][8][installer code] enters programming. Section [006] 001 sets the installer code and 002 sets the master code. Section [999] software default.

Lockout and firmware

Hardware default fails if installer lockout is enabled.

8-digit codes optional (section [041]).

Questions

What is the default installer code for PowerSeries Neo HS2016/2032/2064/2128?

5555

How do I reset PowerSeries Neo HS2016/2032/2064/2128 to factory defaults?

[*][8][installer code] enters programming. Section [006] 001 sets the installer code and 002 sets the master code. Section [999] software default.

What is the default IP?

n/a

Why is my installer code not working?

Hardware default fails if installer lockout is enabled.

Source: PowerSeries Neo reference manual

Planning aid only. Values are typical and vary by manufacturer, code edition and jurisdiction. Verify with manufacturer data, NEC/NFPA/TIA and the local AHJ. HireLV is not liable for designs based on these tools.