HireLV Handbook › Defaults › Hanwha › Wisenet cameras

Verified 2026-10-17

Wisenet cameras default installer code and reset

Suggest a correction

Suggest a correction

A free account is required. Reports stay private until a correction is published.

Default codes are for authorized installers. Change defaults at commissioning. No bypass or unauthorized-access instructions.

Hanwha Wisenet cameras. Last verified 2026-10-17 against Support KB 5777495517083.

Defaults Flag

usernameadmin
passwordnone - create on first access
Default IP192.168.1.100 if no DHCP

Reset

Hold the recessed reset button while powered until the LEDs change.

Questions

What is the default installer code for Wisenet cameras?

admin

How do I reset Wisenet cameras to factory defaults?

Hold the recessed reset button while powered until the LEDs change.

What is the default IP?

192.168.1.100 if no DHCP

Why is my installer code not working?

It was probably changed at install. Use the manufacturer reset, not a bypass.

Source: Support KB 5777495517083

Planning aid only. Values are typical and vary by manufacturer, code edition and jurisdiction. Verify with manufacturer data, NEC/NFPA/TIA and the local AHJ. HireLV is not liable for designs based on these tools.