HireLV Handbook › Defaults › Hikvision › Network cameras

Verified 2026-10-17

Network cameras default installer code and reset

Suggest a correction

Suggest a correction

A free account is required. Reports stay private until a correction is published.

Default codes are for authorized installers. Change defaults at commissioning. No bypass or unauthorized-access instructions.

Hikvision Network cameras. Last verified 2026-10-17 against Web5.0 20260529.

Defaults Flag

usernameadmin
passwordnone - device must be activated with a strong password (SADP/web)
Default IP192.168.1.64

Reset

SADP or web Forget Password (Hik-Connect QR, GUID file, security questions). The email reset service ended Jun 16, 2025.

Secure activation on current firmware; older firmware shipped with a default password (not published here).

Questions

What is the default installer code for Network cameras?

admin

How do I reset Network cameras to factory defaults?

SADP or web Forget Password (Hik-Connect QR, GUID file, security questions). The email reset service ended Jun 16, 2025.

What is the default IP?

192.168.1.64

Why is my installer code not working?

It was probably changed at install. Use the manufacturer reset, not a bypass.

Source: Web5.0 20260529

Planning aid only. Values are typical and vary by manufacturer, code edition and jurisdiction. Verify with manufacturer data, NEC/NFPA/TIA and the local AHJ. HireLV is not liable for designs based on these tools.